When it comes to damaged roofing there are four possible actions you can take in order to restore your roof to its initial condition. So, depending on the roof’s damage, any Atlanta roofing company you hire will perform a roof restoration, repair and recover, or decide to remove your old roof and install a new one.

In the roof repair process the professional crew from the Atlanta roofing company will perform a repair work of deteriorated areas and leaks. Nevertheless, this type of job requires highly skilled workers that know how to use the proper materials for roof repairs.

A roof restoration process is an intermediate step between retrofit and repair and it includes repairs for all flashing and a new fluid-type liquid with an optional fabric or mat installed over an entire roof area. In this procedure, the professional workers from the roofing company you’ve hired will refit all related flashing and the existing roofing system with a brand new membrane cover, over the top of the actual roof membrane. The two membranes will be separated with new insulation. If you opt for this procedure then you should know that it can be very cost effective in the long run. Usually a retrofit roof may be successfully completed if the original roofing system is securely attached to the deck, does not present serious deterioration and insulation and the structural deck are in good condition. Of course, for the retrofit to be efficient the roofing system must not have excessive moisture.

Almost all roofing experts and material manufacturers will advise you against installing a new cover on top of your old roof cover because all the problems and defects that are in the old roofing system can transfer to the new roofing system. It would be a big mistake to reroof on top of your old roof covering because the roof will exposed to the risk of trapping moisture from the existing roof under the new roof membrane. That is way this risk must be taken out of the equation if you remove your old roof before installing a new one.

Before the professional roofers decide between retrofit and replacement of the roof, they must first perform a moisture survey and an accurate engineering study. Thus, any wet or damaged insulation must be removed and replaced with new insulation material. Furthermore, the existing insulation material must be vented with random cuts through the existing membrane at approximately fifteen feet in every direction.

Generally, a plan for a roof removal needs special provisions in order to keep the building watertight during construction as well as for dealing with potential noise pollution, odor, dust, occupant considerations and safety. Also keep in mind that usually many of your existing roof components can be recycled.

For more info please visit : benjamincorp

To add a comment please login by clicking here